72V281L20TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V281L20TF8 Overview
FIFO memory chip can be found in the LQFP package.In this case, it is packaged in case number Tape & Reel .It is recommended that memory IC be mounted in the Surface Mount direction.With a supply voltage of 3.3V volts, high efficiency is possible.FIFO means contains 64 terminations.64 pin is used for operation.Its maximum operating current is 55mA .FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.FIFOs contains this gadget in its entirety.A OTHER FIFO memory type IC is used in the part.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.There are a total of 64 pins on this FIFO memory IC.When the frequency is set to 50MHz it can maintain good accuracy.For regular operation, the memory logic's maximum value is 50MHz .
72V281L20TF8 Features
FIFOs category
Frequency at most
72V281L20TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V281L20TF8 FIFOs Memory applications.
- Magnetic memories
- Temporary storage elements
- Address mapping
- Game Controller
- Medical Monitoring Device
- Thermal Management for DDR3 Memory Modules
- Analog-to-digital converters
- Switches
- Cameras
- Event Recorder
