72V283L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 32KX18 |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V283L10PF Overview
The TQFP package contains FIFO memory chip.A Surface Mount mounting method is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.As a result of this, FIFO means contains 80 terminations.80 pin is used for operation.FIFO design requires 35mA amps of current to operate.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.FIFOs contains this gadget in its entirety.It has a type OTHER FIFO memory IC.In some cases, FIFO operates at a very low supply voltage, such as 3.15V V.FIFO memory can handle a maximum supply voltage of 3.45V V.The FIFO memory IC is equipped with a total of 80 pins.It is capable of maintaining good accuracy with a frequency of 100MHz .Regular operation has a FIFO memory's maximum value of 100MHz .
72V283L10PF Features
FIFOs category
Frequency at most
72V283L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V283L10PF FIFOs Memory applications.
- Data communications
- High-speed graphics pixel buffer
- SPD for DDR3 Memory Modules
- Character generators
- Product traceability
- Look-up Tables
- Signal processing
- Communications
- Computer Systems
- Laser Receiver System
