72V283L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 32KX18 |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V283L10PF8 Overview
FIFO memory chip can be found in the TQFP package.The recommended mounting method for this FIFO products is Surface Mount .It is possible to achieve high efficiency with a supply voltage of 3.3V .FIFO consists of 80 terminations, which indicates that FIFO means is empty.80 pins are used for operation.The maximum current required for its operation is 35mA .FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.It is self-contained in FIFOs .It has a type OTHER FIFO memory IC.In some cases, FIFO operates at a very low supply voltage, such as 3.15V V.A maximum voltage of 3.45V volts can be applied to FIFO memory.This FIFO memory IC is equipped with 80 pins in total.In spite of the frequency 100MHz , it is capable of maintaining a good level of accuracy.A FIFO memory's maximum value of 100MHz can be used for regular operation.
72V283L10PF8 Features
FIFOs category
Frequency at most
72V283L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V283L10PF8 FIFOs Memory applications.
- Product traceability
- High-speed graphics pixel buffer
- Emulators
- General Data Collection Applications at Extreme High-Temperatures
- Extended product-change notification
- Cameras
- Seismic Data Collection at Extreme Temperatures
- Network switching/routing
- Consumer
- Laser Receiver System
