72V283L6PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 32KX18 |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V283L6PF8 Overview
FIFO memory chip is included in the TQFP package.A Surface Mount mounting method is recommended.High efficiency is possible with a supply voltage of 3.3V .FIFO means contains 80 terminations.FIFO design has 80 operation pins.In order to operate FIFO design, a maximum current of 35mA is required.In order to maximize efficiency, the supply voltage should be set to 3.3V .During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.In FIFOs , this gadget is self-contained.A OTHER FIFO type memory IC is present in the FIFO memory chip.If the supply voltage is very low, such as 3.15V V, FIFO may be able to operate.This FIFO memory chip can handle maximum supply voltages of 3.45V volts.A total of 80 pins are present on the FIFO memory IC.With a frequency of 166MHz , it maintains good accuracy.During regular operation, the FIFO memory's maximum value is 166MHz .
72V283L6PF8 Features
FIFOs category
Frequency at most
72V283L6PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V283L6PF8 FIFOs Memory applications.
- Application that requires re-writable nonvolatile parameter memory
- Extended product life cycle
- Address mapping
- Game Consoles
- Portable Information Devices
- Laser Receiver System
- Switches
- Measurement Equipment
- Network switching/routing
- One assembly
