72V283L7-5PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 32KX18 |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V283L7-5PF Overview
You can find FIFO memory chip in package TQFP .Surface Mount is recommended as the mounting method.If the supply voltage is set to 3.3V , high efficiency can be achieved.FIFO means contains 80 terminations.80 pin is used for operation.In order for FIFO design to operate, a maximum current of 35mA is required.A 3.3V supply voltage will ensure FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget in FIFOs is self-contained.This part has a memory type of OTHER FIFO .In some cases, FIFO operates at a very low supply voltage, such as 3.15V V.An input voltage of 3.45V V is the maximum that FIFO memory can handle.It consists of a total of 80 pins.A frequency of 133.3MHz is capable of maintaining good accuracy.For regular operation, the memory logic's maximum value is 133.3MHz .
72V283L7-5PF Features
FIFOs category
Frequency at most
72V283L7-5PF Applications
There are a lot of Integrated Device Technology (IDT) 72V283L7-5PF FIFOs Memory applications.
- Computer networks
- Character generators
- Video
- Test Equipment
- Optical memories
- Consumer
- Analog-to-digital converters
- Network bridges
- Transistors
- GPS Offender Tracking
