72V283L7-5PFGI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 32KX18 |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V283L7-5PFGI Overview
You will find FIFO memory chip in the TQFP package.Memory IC's recommended mounted way is Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.I found that it has 80 terminations in FIFO means.There are 80 pins on the operation pins.For its operation, 35mA is the maximum current required.A voltage of 3.3V should be used for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 85°C °C, which allows for stable operation.The gadget is self-contained and can be found in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.FIFO memory chips may be operated at very low supply voltages, such as 3.15V volts.FIFO memory is capable of handling a maximum supply voltage of 3.45V volts.It consists of a total of 80 pins.With a frequency of 133.3MHz , it maintains good accuracy.There is 133.3MHz FIFO memory IC's maximum value for regular operation.
72V283L7-5PFGI Features
FIFOs category
Frequency at most
72V283L7-5PFGI Applications
There are a lot of Integrated Device Technology (IDT) 72V283L7-5PFGI FIFOs Memory applications.
- Code converters
- Cameras
- Application that requires re-writable nonvolatile parameter memory
- Extended product life cycle
- Data communications
- Analog-to-digital converters
- Programmable Logic Controller
- Portable Information Devices
- Networking
- Firmware loaders
