72V285L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V285L10PF Overview
The TQFP package contains FIFO memory chip.Mounting it in the Surface Mount way is recommended.A supply voltage of 3.3V is capable of producing high efficiency.The number of terminations in FIFO means is 64 .As far as the operation pins are concerned, they are 64 pins.There is a maximum current requirement of 60mA for its operation.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.FIFOs contains this gadget in its entirety.In this part, the memory type is OTHER FIFO .FIFO may operate at a very low supply voltage, such as 3V V.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.There are a total of 64 pins on this FIFO memory IC.When the frequency is set to 100MHz it can maintain good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.
72V285L10PF Features
FIFOs category
Frequency at most
72V285L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V285L10PF FIFOs Memory applications.
- Test site
- Communications
- Address mapping
- SPI Bus Flash Memory Devices
- Application that requires re-writable nonvolatile parameter memory
- Down-Hole Energy Drilling
- IP Radio
- Test Equipment
- Thermal Management for DDR3 Memory Modules
- Rate buffers
