72V285L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Weight | 360.605934mg |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height | 1.4mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V285L10PF8 Overview
The TQFP package contains FIFO memory chip.Mounting it in the Surface Mount way is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .FIFO means contains 64 terminations.There are 64 pins on the operation pins.There is a maximum current requirement of 60mA for its operation.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.It operates at 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.There is a self-contained gadget within FIFOs .The IC of the part is OTHER FIFO memory type.FIFO may operate at very low supply voltages, such as 3V volts.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.This FIFO memory IC is equipped with 64 pins in total.A frequency of 100MHz is capable of maintaining good accuracy.There is 100MHz FIFO memory IC's maximum value for regular operation.
72V285L10PF8 Features
FIFOs category
Frequency at most
72V285L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V285L10PF8 FIFOs Memory applications.
- Controlled baseline
- PC peripheral
- High-speed disk
- Test Equipment
- Disk Controllers
- Desktop Computers
- TVs
- Buses
- Multi-stage synchronizer
- Thermal Management for DDR3 Memory Modules
