72V285L10PFG
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Weight | 360.605934mg |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Memory Size | 144kB |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 18b |
| Density | 1.1 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height | 1.4mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
72V285L10PFG Overview
FIFO memory chip is included in the TQFP package.There is a memory of 144kB on the FIFO chip that can be used to store applications and data.A Surface Mount mounting method is recommended.When the supply voltage is 3.3V , high efficiency is possible.As a result of this, FIFO means contains 64 terminations.As far as the operation pins are concerned, they are 64 pins.In order to operate it, it requires 60mA volts of current.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.Its maximum operating temperature of 70°C °C ensures stable operation.This gadget is self-contained in?FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.An input voltage of 3.6V V is the maximum that FIFO memory can handle.As a result, it contains a total of 64 pins.A frequency of 100MHz is sufficient to maintain good accuracy.For regular operation, the memory logic's maximum value is 100MHz .The 1 circuit is used in order to enhance its flexibility.
72V285L10PFG Features
144kB memory size
FIFOs category
Frequency at most
72V285L10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72V285L10PFG FIFOs Memory applications.
- Thermal Management for DDR3 Memory Modules
- Controlled baseline
- Alarm System
- Routers
- Firmware loaders
- General Data Collection Applications at Low-Temperatures
- Industrial Systems
- Communications Systems
- Seismic Data Collection at Extreme Temperatures
- Communications
