72V285L10TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V285L10TF8 Overview
You can find FIFO memory chip in package LQFP .It's packaged in the shape of a Tape & Reel .Memory IC's recommended mounted way is Surface Mount .If the supply voltage is set to 3.3V , high efficiency can be achieved.A total of 64 terminations can be found in FIFO means.These are the 64 pins for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 60mA .The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.FIFOs contains this gadget in its entirety.There is a memory type OTHER FIFO in the IC of this part.FIFO may operate at very low supply voltages, such as 3V volts.An input voltage of 3.6V V is the maximum that FIFO memory can handle.There are a total of 64 pins on this FIFO memory IC.In spite of the frequency 100MHz , it is capable of maintaining a good level of accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.
72V285L10TF8 Features
FIFOs category
Frequency at most
72V285L10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V285L10TF8 FIFOs Memory applications.
- Game Consoles
- Cameras
- Thermal Management for DDR3 Memory Modules
- Computer networks
- SPD for DDR3 Memory Modules
- Data-acquisition systems
- Firmware loaders
- Notebook
- Multimedia
- Microprogramming
