72V285L10TFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 32KX18 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V285L10TFG Overview
FIFO memory chip is included in the TQFP package.Surface Mount is memory IC's recommended mounting method.A supply voltage of 3.3V allows for high efficiency.In FIFO means, there are 64 terminations.The operation pins are 64 pins.There is a maximum current requirement of 60mA for its operation.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.FIFOs contains this gadget in its entirety.This part is equipped with an IC of type OTHER FIFO memory.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.An input voltage of 3.6V V is the maximum that FIFO memory can handle.There are a total of 64 pins on this board.A frequency of 100MHz is sufficient to maintain good accuracy.During regular operation, the FIFO memory's maximum value is 100MHz .
72V285L10TFG Features
FIFOs category
Frequency at most
72V285L10TFG Applications
There are a lot of Integrated Device Technology (IDT) 72V285L10TFG FIFOs Memory applications.
- GPS Offender Tracking
- Product traceability
- Tape controllers
- Multi-stage synchronizer
- IP Radio
- Consumer
- MP3 Interface for Automobile
- One assembly
- Measurement Equipment
- Firmware loaders
