72V285L10TFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 100MHz |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Direction | Unidirectional |
| Density | 1.1 Mb |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | Yes |
| Programmable Flags Support | Yes |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V285L10TFG8 Overview
You can find FIFO memory chip in the LQFP package.It is pointing in the direction of Surface Mount .64 pins are the operation pins.Its maximum operating current is 60mA .When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.FIFO may operate at a very low supply voltage, such as 3V V.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.It is capable of maintaining good accuracy with a frequency of 100MHz .It is recommended that the FIFO memory's maximum value be set to 100MHz .
72V285L10TFG8 Features
Frequency at most
72V285L10TFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V285L10TFG8 FIFOs Memory applications.
- Computer Systems
- Signal processing
- Digital buffering
- Queues for communication systems
- Consumer Systems
- TVs
- SPI Bus Flash Memory Device
- Tape controllers
- Address mapping
- PC peripheral
