72V285L15PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Density | 1.1 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V285L15PFI Overview
This package is included in TQFP .Mounting it in Surface Mount is recommended.Supply voltages of 3.3V are capable of achieving high efficiency.A total of 64 terminations can be found in FIFO means.These are the 64 pins for operation.FIFO design requires a maximum current of 60mA to operate.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.There is a self-contained gadget within FIFOs .This part has a memory type of OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.A maximum voltage of 3.6V volts can be applied to FIFO memory.There are a total of 64 pins on this board.When the frequency is set to 66.7MHz it can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 66.7MHz .
72V285L15PFI Features
FIFOs category
Frequency at most
72V285L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V285L15PFI FIFOs Memory applications.
- Video time base correction
- Network switching/routing
- Magnetic memories
- Multimedia
- Medical Monitoring Device
- IP Camera Buffer
- Portable Information Devices
- Look-up Tables
- Seismic Data Collection at Extreme Temperatures
- Wireless
