72V285L15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Weight | 360.605934mg |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Density | 1.1 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height | 1.4mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V285L15PFI8 Overview
FIFO memory chip is included in the TQFP package.Memory IC's recommended mounted way is Surface Mount .A supply voltage of 3.3V is capable of producing high efficiency.A total of 64 terminations are contained within FIFO means.There are 64 pins on the operation pins.There is a maximum current requirement of 60mA for its operation.In order to maximize efficiency, the supply voltage should be set to 3.3V .The FIFO products must be run at a minimum temperature of -40°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.FIFOs contains this gadget in its entirety.It has a type OTHER FIFO memory IC.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.An input voltage of 3.6V V is the maximum that FIFO memory can handle.There are a total of 64 pins on this board.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.There is 66.7MHz FIFO memory IC's maximum value for regular operation.
72V285L15PFI8 Features
FIFOs category
Frequency at most
72V285L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V285L15PFI8 FIFOs Memory applications.
- Temporary storage elements
- Character generators
- Signal processing
- Tape controllers
- Game Controller
- SPI Bus Flash Memory Devices
- Disk Controllers
- Extended product-change notification
- Data communications
- Cardiac Monitoring Device
