72V285L15TF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V285L15TF Overview
This package is included in LQFP .It is recommended that memory IC be mounted in the Surface Mount direction.A supply voltage of 3.3V allows for high efficiency.I found that it has 64 terminations in FIFO means.There are 64 pins on the operation pins.FIFO design requires 60mA amps of current to operate.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO may operate at very low supply voltages, such as 3V volts.FIFO memory can handle a maximum supply voltage of 3.6V volts.As a result, it contains a total of 64 pins.A frequency of 66.7MHz is sufficient to maintain good accuracy.Regular operation has a FIFO memory's maximum value of 66.7MHz .
72V285L15TF Features
FIFOs category
Frequency at most
72V285L15TF Applications
There are a lot of Integrated Device Technology (IDT) 72V285L15TF FIFOs Memory applications.
- Data communications
- Measurement Equipment
- Extended product life cycle
- Controlled baseline
- TVs
- Networking
- Address mapping
- Smart Meter
- Cardiac Monitoring Device
- GPS Offender Tracking
