72V285L15TFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Density | 1.1 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V285L15TFI Overview
The TQFP package contains FIFO memory chip.Mounting it in Surface Mount is recommended.If the supply voltage is set to 3.3V , high efficiency can be achieved.FIFO means contains 64 terminations.These are the 64 pins for operation.For its operation, 60mA is the maximum current required.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.85°C °C is the memory logic's maximum operating temperature that allows stable operation.It is contained within FIFOs .This part has a memory type of OTHER FIFO .In some cases, FIFO operates at a very low supply voltage, such as 3V V.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.There are a total of 64 pins on this FIFO memory IC.It maintains good accuracy at a 66.7MHz frequency.66.7MHz is the FIFO memory IC's maximum value for regular operation.
72V285L15TFI Features
FIFOs category
Frequency at most
72V285L15TFI Applications
There are a lot of Integrated Device Technology (IDT) 72V285L15TFI FIFOs Memory applications.
- SPI Bus Flash Memory Devices
- Computers
- Optical memories
- Seismic Data Collection at Extreme Temperatures
- SPI Bus Flash Memory Device
- Data communications
- Test site
- MP3 Interface for Automobile
- Medical Monitoring Device
- HDD
