72V285L20PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V285L20PF Overview
The TQFP package contains FIFO memory chip.The recommended mounting way is Surface Mount .Supply voltages of 3.3V are capable of achieving high efficiency.FIFO means contains 64 terminations.There are 64 pins on the operation pins.FIFO requires a minimum of 60mA current to operate.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.There is a self-contained gadget within FIFOs .There is a memory type OTHER FIFO in the IC of this part.Low supply voltages, such as 3V V, may be required for operation.The memory logic's maximum supply voltage is 3.6V volts.It consists of a total of 64 pins.It is capable of maintaining good accuracy with a frequency of 50MHz .50MHz is the FIFO memory IC's maximum value for regular operation.
72V285L20PF Features
FIFOs category
Frequency at most
72V285L20PF Applications
There are a lot of Integrated Device Technology (IDT) 72V285L20PF FIFOs Memory applications.
- Event Recorder
- Extended product life cycle
- Communications
- Optical memories
- Communications Systems
- IP Radio
- Measurement Equipment
- Computer Systems
- Tape controllers
- PC peripheral
