72V285L20PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Weight | 360.605934mg |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height | 1.4mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V285L20PF8 Overview
You will find FIFO memory chip in the TQFP package.Mounting it in Surface Mount is recommended.When the supply voltage is 3.3V , high efficiency is possible.In FIFO means, there are 64 terminations.The operation pins are 64 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 60mA .When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.A self-contained gadget is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.There are a total of 64 pins on this board.Despite a frequency of 50MHz , it is capable of maintaining good accuracy.During regular operation, 50MHz is the FIFO memory's maximum value.
72V285L20PF8 Features
FIFOs category
Frequency at most
72V285L20PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V285L20PF8 FIFOs Memory applications.
- Tape controllers
- Rate buffers
- Switches
- High-speed graphics pixel buffer
- Data communications
- Thermal Management for DDR3 Memory Modules
- Programmable Logic Controller
- Industrial Systems
- Communications
- Analog-to-digital converters
