72V285L20TF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V285L20TF Overview
This package is included in LQFP .Mounting it in the Surface Mount way is recommended.A supply voltage of 3.3V allows for high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.FIFO design has 64 operation pins.For its operation, 60mA is the maximum current required.A 3.3V supply voltage will ensure FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.The gadget in FIFOs is self-contained.This part has a memory type of OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as3V volts.A maximum voltage of 3.6V volts can be applied to FIFO memory.It has a total of 64 pins on it.When the frequency is set to 50MHz it can maintain good accuracy.During regular operation, the FIFO memory's maximum value is 50MHz .
72V285L20TF Features
FIFOs category
Frequency at most
72V285L20TF Applications
There are a lot of Integrated Device Technology (IDT) 72V285L20TF FIFOs Memory applications.
- Extended product life cycle
- Seismic Data Collection at Extreme Temperatures
- Consumer Systems
- Signal processing
- Measurement Equipment
- Programmable Logic Controller
- Data
- SPD for DDR3 Memory Modules
- Microprogramming
- General Data Collection Applications at Extreme High-Temperatures
