72V285L20TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 60mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V285L20TF8 Overview
The LQFP package contains FIFO memory chip.It comes in a Tape & Reel (TR) package.A Surface Mount mounting method is recommended.With a supply voltage of 3.3V volts, high efficiency is possible.A total of 64 terminations can be found in FIFO means.The operation pins are 64 pins.FIFO design requires a maximum current of 60mA to operate.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.FIFOs contains this gadget in its entirety.This part has a memory type of OTHER FIFO .Low supply voltages, such as 3V V, may be required for operation.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.The FIFO memory IC has a total of 64 pins.There is 50MHz FIFO memory IC's maximum value for regular operation.
72V285L20TF8 Features
FIFOs category
Frequency at most
72V285L20TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V285L20TF8 FIFOs Memory applications.
- High-speed graphics pixel buffer
- Desktop Computers
- Network switching/routing
- Signal processing
- Communications Systems
- Analog-to-digital converters
- Magnetic memories
- Battery Charger
- Data
- Buses
