72V291L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Weight | 360.605934mg |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 128KX9 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height | 1.4mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V291L10PF8 Overview
The TQFP package contains FIFO memory chip.A Surface Mount mounting method is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.64 terminations are contained in FIFO means.64 pins are the operation pins.FIFO design requires 55mA amps of current to operate.In order to maximize efficiency, the supply voltage should be set to 3.3V .The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.In FIFOs , this gadget is self-contained.A OTHER FIFO memory type IC is used in the part.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.The FIFO memory IC is equipped with a total of 64 pins.It is capable of maintaining good accuracy with a frequency of 100MHz .Normally, the FIFO memory's maximum value is 100MHz .
72V291L10PF8 Features
FIFOs category
Frequency at most
72V291L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V291L10PF8 FIFOs Memory applications.
- TVs
- One assembly
- Consumer
- Cardiac Monitoring Device
- General Data Collection Applications at Low-Temperatures
- Multi-stage synchronizer
- Network bridges
- Computers
- Portable Information Devices
- Emulators
