72V291L10TF8
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 128KX9 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
72V291L10TF8 Overview
This package is included in LQFP .There's a Tape & Reel on the package.It is pointing in the direction of Surface Mount .An input voltage of 3.3V results in high efficiency.In FIFO means, there are 64 terminations.There are 64 pins for operation.FIFO design requires a maximum current of 55mA to operate.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.It operates at 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.A self-contained gadget is contained in FIFOs .The IC of the part is OTHER FIFO memory type.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.Currently, it has 64 pins.A frequency of 100MHz is capable of maintaining good accuracy.There is 100MHz FIFO memory IC's maximum value for regular operation.
72V291L10TF8 Features
FIFOs category
Frequency at most
72V291L10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V291L10TF8 FIFOs Memory applications.
- Consumer
- High-speed disk
- Cardiac Monitoring Device
- Thermal Management for DDR3 Memory Modules
- Medical Monitoring Device
- Microprogramming
- Address mapping
- Test Equipment
- Queues for communication systems
- Emulators
