72V291L10TFG8
| Parameters | |
|---|---|
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 128KX9 |
| Standby Current-Max | 0.02A |
72V291L10TFG8 Overview
FIFO memory chip can be found in the LQFP package.A Surface Mount mounting method is recommended.An input voltage of 3.3V results in high efficiency.As a result of this, FIFO means contains 64 terminations.The operation pins are 64 pins.There is a maximum current requirement of 55mA for its operation.A voltage of 3.3V should be used for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.The gadget is self-contained and can be found in FIFOs .This part has a memory type of OTHER FIFO .FIFO may operate at very low supply voltages, such as 3V volts.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.Approximately 64 pins are attached to it.Normally, the FIFO memory's maximum value is 100MHz .
72V291L10TFG8 Features
FIFOs category
Frequency at most
72V291L10TFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V291L10TFG8 FIFOs Memory applications.
- Thermal Management for DDR3 Memory Modules
- Communications Systems
- Industrial Systems
- Network bridges
- Wireless
- A/D output buffers
- Telecommunication
- Battery Charger
- General Data Collection Applications at Low-Temperatures
- Computer Systems
