72V291L15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Weight | 360.605934mg |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 128KX9 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height | 1.4mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V291L15PF8 Overview
You will find FIFO memory chip in the TQFP package.It is pointing in the direction of Surface Mount .An input voltage of 3.3V results in high efficiency.FIFO means contains 64 terminations.64 pin is used for operation.The maximum current required for its operation is 55mA .When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.An operating temperature of 70°C °C is necessary for stable operation.It is self-contained in FIFOs .In this part, the memory type is OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 3V volts.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.This FIFO memory IC is equipped with 64 pins in total.A frequency of 66.7MHz is capable of maintaining good accuracy.During regular operation, the FIFO memory's maximum value is 66.7MHz .
72V291L15PF8 Features
FIFOs category
Frequency at most
72V291L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V291L15PF8 FIFOs Memory applications.
- Wireless
- Down-Hole Energy Drilling
- Controlled baseline
- Programmable Logic Controller
- Optical memories
- Data
- Portable Information Devices
- Telecommunication
- Network switching/routing
- Analog-to-digital converters
