72V291L15TF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 128KX9 |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V291L15TF Overview
You can find FIFO memory chip in the LQFP package.Surface Mount is recommended as the mounting method.It is possible to achieve high efficiency with a supply voltage of 3.3V .The number of terminations in FIFO means is 64 .As far as the operation pins are concerned, they are 64 pins.Its maximum operating current is 55mA .A 3.3V supply voltage will ensure FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.An operating temperature of 70°C °C is necessary for stable operation.FIFOs contains this gadget in its entirety.There is a memory type OTHER FIFO in the IC of this part.The FIFO memory chip may be operated at very low supply voltages, such as3V volts.An input voltage of 3.6V V is the maximum that FIFO memory can handle.Approximately 64 pins are attached to it.The memory logic's maximum value is 66.7MHz for regular operation.
72V291L15TF Features
FIFOs category
Frequency at most
72V291L15TF Applications
There are a lot of Integrated Device Technology (IDT) 72V291L15TF FIFOs Memory applications.
- Computer networks
- Communications
- Video
- Code converters
- Buses
- Analog-to-digital converters
- Programmable Logic Controller
- Microprogramming
- Look-up Tables
- Data
