72V291L15TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Weight | 360.605934mg |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 128KX9 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height | 1.4mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V291L15TF8 Overview
You can find FIFO memory chip in the TQFP package.Surface Mount is recommended as the mounting method.When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains 64 terminations.As far as the operation pins are concerned, they are 64 pins.FIFO design requires 55mA amps of current to operate.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.A self-contained gadget is contained within FIFOs .The IC of the part is of the type OTHER FIFO .In some cases, FIFO operates at a very low supply voltage, such as 3V V.A maximum voltage of 3.6V volts can be applied to FIFO memory.As a result, it contains a total of 64 pins.A frequency of 66.7MHz is sufficient to maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .
72V291L15TF8 Features
FIFOs category
Frequency at most
72V291L15TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V291L15TF8 FIFOs Memory applications.
- Battery Charger
- Seismic Data Collection at Extreme Temperatures
- TVs
- Notebook
- Down-Hole Energy Drilling
- Cardiac Monitoring Device
- Emulators
- Thermal Management for DDR3 Memory Modules
- Address mapping
- Event Recorder
