72V291L15TFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 128KX9 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V291L15TFI Overview
TQFP is the package in which FIFO memory chip is contained.Mounting it in Surface Mount is recommended.An input voltage of 3.3V results in high efficiency.A total of 64 terminations are contained within FIFO means.Operation pins are 64 .In order to operate FIFO design, a maximum current of 55mA is required.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.An operating temperature of 85°C °C is necessary for stable operation.In FIFOs , there is a self-contained gadget.The IC of the part is of the type OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.Approximately 64 pins are attached to it.In the presence of a 66.7MHz frequency, it can maintain good accuracy.The memory logic's maximum value is 66.7MHz for regular operation.
72V291L15TFI Features
FIFOs category
Frequency at most
72V291L15TFI Applications
There are a lot of Integrated Device Technology (IDT) 72V291L15TFI FIFOs Memory applications.
- Laser Receiver System
- Buses
- PC peripheral
- Test site
- Rate buffers
- Communications
- Tape controllers
- Telecommunication
- Controlled baseline
- Extended product-change notification
