72V291L20PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 128KX9 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V291L20PF Overview
This package is included in TQFP .Surface Mount is memory IC's recommended mounting method.When the supply voltage is 3.3V , high efficiency is possible.FIFO means contains 64 terminations.There are 64 pins on the operation pins.FIFO design requires 55mA amps of current to operate.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget is self-contained and can be found in FIFOs .There is a memory type OTHER FIFO in the IC of this part.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.A total of 64 pins are present on the FIFO memory IC.It is capable of maintaining good accuracy with a frequency of 50MHz .Regular operation has a FIFO memory's maximum value of 50MHz .
72V291L20PF Features
FIFOs category
Frequency at most
72V291L20PF Applications
There are a lot of Integrated Device Technology (IDT) 72V291L20PF FIFOs Memory applications.
- Seismic Data Collection at Extreme Temperatures
- Cardiac Monitoring Device
- Microprogramming
- Portable Information Devices
- High-speed disk
- Portable Information Devices
- Computer Systems
- Multi-stage synchronizer
- Data
- Fabrication Site
