72V291L20TF
| Parameters | |
|---|---|
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 128KX9 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
72V291L20TF Overview
This package is included in LQFP .The recommended mounting method for this FIFO products is Surface Mount .An input voltage of 3.3V results in high efficiency.In FIFO means, there are 64 terminations.Operation pins are 64 .There is a maximum current requirement of 55mA for its operation.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.FIFOs contains this gadget in its entirety.It has a type OTHER FIFO memory IC.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.This FIFO memory IC is equipped with 64 pins in total.Despite a frequency of 50MHz , it is capable of maintaining good accuracy.During normal operation, the FIFO memory's maximum value is 50MHz .
72V291L20TF Features
FIFOs category
Frequency at most
72V291L20TF Applications
There are a lot of Integrated Device Technology (IDT) 72V291L20TF FIFOs Memory applications.
- Character generators
- High-speed graphics pixel buffer
- Disk Controllers
- TVs
- General Data Collection Applications at Low-Temperatures
- A/D output buffers
- Battery Charger
- Network switching/routing
- Extended product life cycle
- Transistors
