72V291L20TF8
| Parameters | |
|---|---|
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height | 1.4mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Weight | 360.605934mg |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 128KX9 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
72V291L20TF8 Overview
TQFP is the package in which FIFO memory chip is contained.Mounting it in Surface Mount is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .64 terminations are contained in FIFO means.As far as the operation pins are concerned, they are 64 pins.The maximum current required for its operation is 55mA .Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.In FIFOs , there is a self-contained gadget.There is a memory type OTHER FIFO in the IC of this part.In some cases, FIFO operates at a very low supply voltage, such as 3V V.FIFO memory can handle a maximum supply voltage of 3.6V volts.As a result, it contains a total of 64 pins.A frequency of 50MHz is sufficient to maintain good accuracy.A FIFO memory's maximum value of 50MHz can be used for regular operation.
72V291L20TF8 Features
FIFOs category
Frequency at most
72V291L20TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V291L20TF8 FIFOs Memory applications.
- Rate buffers
- Product traceability
- Extended product life cycle
- Buses
- SPI Bus Flash Memory Device
- Data-acquisition systems
- Video Processing
- Code converters
- Test site
- TVs
