72V293L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 64KX18 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V293L10PF Overview
You will find FIFO memory chip in the TQFP package.Mounting it in Surface Mount is recommended.An input voltage of 3.3V results in high efficiency.The number of terminations in FIFO means is 80 .Operation pins are 80 .FIFO design requires a maximum current of 35mA to operate.A voltage of 3.3V should be used for FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.70°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained in FIFOs .In this part, the memory type is OTHER FIFO .FIFO may operate at a very low supply voltage, such as 3.15V V.A maximum voltage of 3.45V volts can be applied to FIFO memory.Currently, it has 80 pins.It is capable of maintaining good accuracy with a frequency of 100MHz .During normal operation, the FIFO memory's maximum value is 100MHz .
72V293L10PF Features
FIFOs category
Frequency at most
72V293L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V293L10PF FIFOs Memory applications.
- Disk Controllers
- Rate buffers
- Queues for communication systems
- Cameras
- Magnetic memories
- Code converters
- Computer networks
- Firmware loaders
- IP Radio
- Test Equipment
