72V293L10PFI
| Parameters | |
|---|---|
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 64KX18 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
72V293L10PFI Overview
The TQFP package contains FIFO memory chip.It is pointing in the direction of Surface Mount .Supply voltages of 3.3V are capable of achieving high efficiency.A total of 80 terminations are contained within FIFO means.As far as the operation pins are concerned, they are 80 pins.In order to operate FIFO design, a maximum current of 35mA is required.In order to maximize efficiency, the supply voltage should be set to 3.3V .For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.The memory logic's maximum operating temperature is 85°C °C, which allows for stable operation.It is self-contained in FIFOs .The IC of the part is of the type OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 3.15V volts.A maximum supply voltage of 3.45V V can be handled by this FIFO memory chip.There are a total of 80 pins on this FIFO memory IC.With a frequency of 100MHz , it maintains good accuracy.The memory logic's maximum value is 100MHz for regular operation.
72V293L10PFI Features
FIFOs category
Frequency at most
72V293L10PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V293L10PFI FIFOs Memory applications.
- Medical Monitoring Device
- Laser Receiver System
- Networking
- Industrial Systems
- Programmable Logic Controller
- Network switching/routing
- Portable Information Devices
- Microprogramming
- Alarm System
- Temporary storage elements
