72V293L15PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 64KX18 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V293L15PF Overview
TQFP is a package that contains FIFO memory chip.Memory IC's recommended mounted way is Surface Mount .When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains 80 terminations.In the case of the operation pins, they are 80 pins.FIFO design requires 35mA amps of current to operate.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.This gadget is self-contained in?FIFOs .It has a type OTHER FIFO memory IC.If the supply voltage is very low, such as 3.15V V, FIFO may be able to operate.A maximum voltage of 3.45V volts can be applied to FIFO memory.The FIFO memory IC is equipped with a total of 80 pins.With a frequency of 66.7MHz , it maintains good accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .
72V293L15PF Features
FIFOs category
Frequency at most
72V293L15PF Applications
There are a lot of Integrated Device Technology (IDT) 72V293L15PF FIFOs Memory applications.
- GPS Offender Tracking
- Optical memories
- Laser Receiver System
- Test site
- Rate buffers
- Industrial Systems
- Network switching/routing
- Application that requires re-writable nonvolatile parameter memory
- Extended product-change notification
- High-speed disk
