72V293L15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 64KX18 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V293L15PF8 Overview
FIFO memory chip is contained in the TQFP package.Memory IC's recommended mounted way is Surface Mount .When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains 80 terminations.The operation pins are 80 pins.For its operation, 35mA is the maximum current required.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.A self-contained gadget is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.FIFO may operate at very low supply voltages, such as 3.15V volts.A maximum supply voltage of 3.45V volts can be handled by the FIFO memory chip.This FIFO memory IC is equipped with 80 pins in total.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.The memory logic's maximum value is 66.7MHz for regular operation.
72V293L15PF8 Features
FIFOs category
Frequency at most
72V293L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V293L15PF8 FIFOs Memory applications.
- Communications
- GPS Offender Tracking
- Down-Hole Energy Drilling
- SPD for DDR3 Memory Modules
- Look-up Tables
- Rate buffers
- Signal processing
- Character generators
- General Data Collection Applications at Low-Temperatures
- PC peripheral
