72V293L6PF
| Parameters | |
|---|---|
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 64KX18 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
72V293L6PF Overview
The TQFP package contains FIFO memory chip.You'll find it packaged in the shape of a Bulk .Memory IC's recommended mounted way is Surface Mount .Supply voltages of 3.3V are capable of achieving high efficiency.In FIFO means, there are 80 terminations.There are 80 pins on the operation pins.FIFO requires a minimum of 35mA current to operate.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.The gadget in FIFOs is self-contained.In this part, the memory type is OTHER FIFO .If the supply voltage is very low, such as 3.15V V, FIFO may be able to operate.The FIFO memory chip is capable of handling maximum supply voltages of 3.45V volts.The FIFO memory IC is equipped with a total of 80 pins.When the frequency is set to 166MHz , the system can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 166MHz .
72V293L6PF Features
FIFOs category
Frequency at most
72V293L6PF Applications
There are a lot of Integrated Device Technology (IDT) 72V293L6PF FIFOs Memory applications.
- GPS Offender Tracking
- Cameras
- Communications Systems
- Laser Receiver System
- Video Processing
- Industrial Systems
- Rate buffers
- Multimedia
- IP Radio
- Multi-stage synchronizer
