72V293L6PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 64KX18 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V293L6PF8 Overview
You can find FIFO memory chip in the TQFP package.A Surface Mount mounting method is recommended.An input voltage of 3.3V results in high efficiency.As a result of this, FIFO means contains 80 terminations.80 pins are the operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 35mA .A voltage of 3.3V should be used for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.A self-contained gadget is contained within FIFOs .A OTHER FIFO memory type IC is used in the part.There is a possibility that FIFO can operate at very low supply voltages, such as 3.15V V.FIFO memory can handle a maximum supply voltage of 3.45V volts.Approximately 80 pins are attached to it.In spite of the frequency 166MHz , it is capable of maintaining a good level of accuracy.The memory logic's maximum value is 166MHz for regular operation.
72V293L6PF8 Features
FIFOs category
Frequency at most
72V293L6PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V293L6PF8 FIFOs Memory applications.
- Seismic Data Collection at Extreme Temperatures
- Computer Systems
- Optical memories
- Cameras
- Portable Information Devices
- Disk Controllers
- IP Radio
- HDD
- Down-Hole Energy Drilling
- Alarm System
