72V293L6PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 80 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 64KX18 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V293L6PFG Overview
You can find FIFO memory chip in the TQFP package.It is pointing in the direction of Surface Mount .If the supply voltage is set to 3.3V , high efficiency can be achieved.FIFO means contains a total of 80 terminations.80 pins are the operation pins.FIFO requires a minimum of 35mA current to operate.A 3.3V supply voltage will ensure FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.A self-contained gadget is contained in FIFOs .It has a type OTHER FIFO memory IC.There is a possibility that FIFO may operate at a very low supply voltage, such as 3.15V V.FIFO memory can handle a maximum supply voltage of 3.45V V.The FIFO memory IC has a total of 80 pins.When the frequency is set to 166MHz it can maintain good accuracy.166MHz is the FIFO memory IC's maximum value for regular operation.
72V293L6PFG Features
FIFOs category
Frequency at most
72V293L6PFG Applications
There are a lot of Integrated Device Technology (IDT) 72V293L6PFG FIFOs Memory applications.
- Buses
- Product traceability
- Multimedia
- Fabrication Site
- Portable Information Devices
- SPD for DDR3 Memory Modules
- Temporary storage elements
- TVs
- Video time base correction
- Firmware loaders
