72V293L7-5BCI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Number of Pins | 100 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 64KX18 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.5mm |
| Length | 11mm |
| Width | 11mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V293L7-5BCI Overview
The recommended mounting way is Surface Mount .An input voltage of 3.3V results in high efficiency.A total of 100 terminations can be found in FIFO means.100 pins are used for operation.There is a maximum current requirement of 35mA for its operation.A 3.3V supply voltage will ensure FIFO's maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.85°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained in FIFOs .It has a type OTHER FIFO memory IC.If the supply voltage is very low, such as 3.15V V, FIFO may be able to operate.This FIFO memory chip can handle maximum supply voltages of 3.45V volts.This FIFO memory IC is equipped with 100 pins in total.In the presence of a 133.3MHz frequency, it can maintain good accuracy.During regular operation, the FIFO memory's maximum value is 133.3MHz .
72V293L7-5BCI Features
FIFOs category
Frequency at most
72V293L7-5BCI Applications
There are a lot of Integrated Device Technology (IDT) 72V293L7-5BCI FIFOs Memory applications.
- Wireless
- Queues for communication systems
- Programmable Logic Controller
- Computers
- Communications Systems
- SPI Bus Flash Memory Device
- Fabrication Site
- Down-Hole Energy Drilling
- Extended product-change notification
- Disk Controllers
