72V293L7-5PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Weight | 513.60831mg |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Memory Size | 128kB |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Data Bus Width | 18b |
| Organization | 64KX18 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height | 1.4mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V293L7-5PF Overview
TQFP is a package that contains FIFO memory chip.In addition, the FIFO chip has a memory capacity of 128kB , which can be used to store applications and data.The recommended mounting method for this FIFO products is Surface Mount .It is possible to achieve high efficiency with a supply voltage of 3.3V .The number of terminations in FIFO means is 80 .80 pins are the operation pins.FIFO requires a minimum of 35mA current to operate.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.A self-contained gadget is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.Low supply voltages, such as 3.15V V, may be required for operation.The FIFO memory chip is capable of handling maximum supply voltages of 3.45V volts.There are a total of 80 pins on this board.It is capable of maintaining good accuracy with a frequency of 133.3MHz .For regular operation, the memory logic's maximum value is 133.3MHz .
72V293L7-5PF Features
128kB memory size
FIFOs category
Frequency at most
72V293L7-5PF Applications
There are a lot of Integrated Device Technology (IDT) 72V293L7-5PF FIFOs Memory applications.
- Tape controllers
- PC peripheral
- Transistors
- Address mapping
- Data-acquisition systems
- Emulators
- Network bridges
- Programmable Logic Controller
- Extended product life cycle
- Optical memories
