72V293L7-5PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 64KX18 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V293L7-5PF8 Overview
You will find FIFO memory chip in the TQFP package.Memory IC's recommended mounted way is Surface Mount .A supply voltage of 3.3V allows for high efficiency.FIFO means contains 80 terminations.80 pin is used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 35mA .When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.A self-contained gadget is contained within FIFOs .It has a OTHER FIFO memory type IC.There is a possibility that FIFO may operate at a very low supply voltage, such as 3.15V V.An input voltage of 3.45V V is the maximum that FIFO memory can handle.The FIFO memory IC has a total of 80 pins.A frequency of 133.3MHz is sufficient to maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 133.3MHz .
72V293L7-5PF8 Features
FIFOs category
Frequency at most
72V293L7-5PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V293L7-5PF8 FIFOs Memory applications.
- Multimedia
- Signal processing
- Product traceability
- Multi-stage synchronizer
- Event Recorder
- Computer Systems
- Battery Charger
- Network switching/routing
- Networking
- Character generators
