72V293L7-5PFGI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 80 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 64KX18 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V293L7-5PFGI Overview
FIFO memory chip can be found in the TQFP package.Mounting it in Surface Mount is recommended.Supply voltages of 3.3V are capable of achieving high efficiency.A total of 80 terminations can be found in FIFO means.80 pins are used for operation.In order for FIFO design to operate, a maximum current of 35mA is required.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of -40°C degrees Celsius to ensure reliabilFIFOy.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained within FIFOs .This part has a memory type of OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 3.15V V.FIFO memory can handle a maximum supply voltage of 3.45V volts.This FIFO memory IC is equipped with 80 pins in total.Despite a frequency of 133.3MHz , it is capable of maintaining good accuracy.For regular operation, the memory logic's maximum value is 133.3MHz .
72V293L7-5PFGI Features
FIFOs category
Frequency at most
72V293L7-5PFGI Applications
There are a lot of Integrated Device Technology (IDT) 72V293L7-5PFGI FIFOs Memory applications.
- Signal processing
- Optical memories
- Rate buffers
- Network switching/routing
- Product traceability
- Test Equipment
- Network bridges
- MP3 Interface for Automobile
- Networking
- Alarm System
