72V293L7-5PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133.3MHz |
| Pin Count | 80 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 64KX18 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V293L7-5PFI Overview
You will find FIFO memory chip in the TQFP package.Surface Mount is recommended as the mounting method.When the supply voltage is 3.3V , high efficiency is possible.80 terminations are contained in FIFO means.These are the 80 pins for operation.In order to operate FIFO design, a maximum current of 35mA is required.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.It is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.FIFO may operate at very low supply voltages, such as 3.15V volts.FIFO memory can handle a maximum supply voltage of 3.45V V.Currently, it has 80 pins.It is capable of maintaining good accuracy with a frequency of 133.3MHz .During normal operation, the FIFO memory's maximum value is 133.3MHz .
72V293L7-5PFI Features
FIFOs category
Frequency at most
72V293L7-5PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V293L7-5PFI FIFOs Memory applications.
- Application that requires re-writable nonvolatile parameter memory
- Multi-stage synchronizer
- Rate buffers
- Look-up Tables
- IP Radio
- SPI Bus Flash Memory Device
- Game Consoles
- Industrial Systems
- Data
- Cameras
