72V295L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 128KX18 |
| Density | 2.3 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V295L10PF8 Overview
TQFP is a package that contains FIFO memory chip.In terms of packaging, it comes in Tape & Reel cases.The recommended mounting method for this FIFO products is Surface Mount .A supply voltage of 3.3V is capable of producing high efficiency.A total of 64 terminations are contained within FIFO means.The operation pins are 64 pins.In order to operate FIFO design, a maximum current of 60mA is required.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .It operates at 0°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.There is a self-contained gadget within FIFOs .It has a OTHER FIFO memory type IC.FIFO may operate at a very low supply voltage, such as 3V V.A maximum voltage of 3.6V volts can be applied to FIFO memory.The FIFO memory IC has a total of 64 pins.With a frequency of 100MHz , it maintains good accuracy.100MHz is the FIFO memory IC's maximum value for regular operation.Additionally, this FIFO memory can be used to generate EASILY EXPANDABLE IN DEPTH AND WIDTH .
72V295L10PF8 Features
FIFOs category
Frequency at most
72V295L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V295L10PF8 FIFOs Memory applications.
- Wireless
- Data
- Buses
- IP Radio
- SPI Bus Flash Memory Devices
- Cardiac Monitoring Device
- Data-acquisition systems
- Product traceability
- Network bridges
- Address mapping
