72V295L20PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 128KX18 |
| Density | 2.3 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V295L20PF Overview
You can find FIFO memory chip in the TQFP package.It is pointing in the direction of Surface Mount .Supply voltages of 3.3V are capable of achieving high efficiency.I found that it has 64 terminations in FIFO means.There are 64 pins on the operation pins.In order to operate it, it requires 60mA volts of current.In order to maximize efficiency, the supply voltage should be set to 3.3V .Keeping the temperature at 0°C degrees Celsius ensures its reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.It is contained within FIFOs .A OTHER FIFO memory type IC is used in the part.FIFO may operate at a very low supply voltage, such as 3V V.A maximum voltage of 3.6V volts can be applied to FIFO memory.The FIFO memory IC is equipped with a total of 64 pins.In spite of the frequency 50MHz , it is capable of maintaining a good level of accuracy.It is recommended that the FIFO memory's maximum value be set to 50MHz .Additionally, EASILY EXPANDABLE IN DEPTH AND WIDTH can be generated with this FIFO memory.
72V295L20PF Features
FIFOs category
Frequency at most
72V295L20PF Applications
There are a lot of Integrated Device Technology (IDT) 72V295L20PF FIFOs Memory applications.
- MP3 Interface for Automobile
- Smart Meter
- Cardiac Monitoring Device
- Switches
- Computer networks
- Product traceability
- Tape controllers
- Computers
- Disk Controllers
- Alarm System
