72V36100L15PFI
| Parameters | |
|---|---|
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Data Bus Width | 36b |
| Organization | 64KX36 |
| Density | 2.3 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height | 1.4mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Weight | 503.487531mg |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Memory Size | 256kB |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
72V36100L15PFI Overview
This package is included in TQFP .A FIFO chip's memory is 256kB , which may be used to store applications and data.It is recommended that memory IC be mounted in the Surface Mount direction.If the supply voltage is set to 3.3V , high efficiency can be achieved.I found that it has 128 terminations in FIFO means.FIFO design has 128 operation pins.In order to operate FIFO design, a maximum current of 40mA is required.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.In FIFOs , there is a self-contained gadget.It has a OTHER FIFO memory type IC.Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.A maximum supply voltage of 3.45V V can be handled by this FIFO memory chip.Currently, it has 128 pins.When the frequency is set to 66.7MHz , the system can maintain good accuracy.There is 66.7MHz FIFO memory IC's maximum value for regular operation.
72V36100L15PFI Features
256kB memory size
FIFOs category
Frequency at most
72V36100L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V36100L15PFI FIFOs Memory applications.
- Character generators
- Magnetic memories
- MP3 Interface for Automobile
- Communications Systems
- Computers
- SPI Bus Flash Memory Device
- PC peripheral
- GPS Offender Tracking
- Consumer Systems
- Product traceability
