banner_page

72V36110L10PF8

128 Terminations3.3V 128 Pin FIFO memory IC6.5 ns Min 3.15V VMax 3.45V V


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-72V36110L10PF8
  • Package: TQFP
  • Datasheet: PDF
  • Stock: 227
  • Description: 128 Terminations3.3V 128 Pin FIFO memory IC6.5 ns Min 3.15V VMax 3.45V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Lead, Tin
Mount Surface Mount
Package / Case TQFP
Number of Pins 128
Published 2008
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3
Number of Terminations 128
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature RETRANSMIT; AUTO POWER DOWN; ASYNCHRONOUS MODE IS ALSO POSSIBLE
HTS Code 8542.32.00.71
Subcategory FIFOs
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 225
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 128
Qualification Status Not Qualified
Operating Supply Voltage 3.3V
Temperature Grade COMMERCIAL
Max Supply Voltage 3.45V
Min Supply Voltage 3.15V
Element Configuration Dual
Operating Mode SYNCHRONOUS
Max Supply Current 40mA
Frequency (Max) 100MHz
Access Time 6.5 ns
Standby Current-Max 0.015A
Memory Density 4718592 bit
Parallel/Serial PARALLEL
Memory IC Type OTHER FIFO
Bus Directional Unidirectional
Retransmit Capability Yes
Output Enable YES
Cycle Time 10 ns
Height Seated (Max) 1.6mm
Length 20mm
Width 14mm
Thickness 1.4mm
RoHS Status RoHS Compliant
Lead Free Contains Lead

72V36110L10PF8 Overview


TQFP is a package that contains FIFO memory chip.A Surface Mount mounting method is recommended.If the supply voltage is set to 3.3V , high efficiency can be achieved.In FIFO means, there are 128 terminations.128 pin is used for operation.FIFO requires a minimum of 40mA current to operate.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.It is contained within FIFOs .It has a OTHER FIFO memory type IC.Low supply voltages, such as 3.15V V, may be required for operation.FIFO memory is capable of handling a maximum supply voltage of 3.45V volts.Approximately 128 pins are attached to it.During normal operation, the FIFO memory's maximum value is 100MHz .It is also possible to generate RETRANSMIT; AUTO POWER DOWN; ASYNCHRONOUS MODE IS ALSO POSSIBLE using this FIFO memory.

72V36110L10PF8 Features


FIFOs category
Frequency at most

72V36110L10PF8 Applications


There are a lot of Integrated Device Technology (IDT) 72V36110L10PF8 FIFOs Memory applications.

  • Down-Hole Energy Drilling
  • Temporary storage elements
  • Tape controllers
  • Computer Systems
  • General Data Collection Applications at Extreme High-Temperatures
  • Notebook
  • Queues for communication systems
  • Network bridges
  • Cardiac Monitoring Device
  • Test Equipment

Write a review

Note: HTML is not translated!
    Bad           Good