72V36110L15PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Weight | 503.487531mg |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 128 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Memory Size | 512kB |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Data Bus Width | 36b |
| Density | 4.5 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height | 1.4mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V36110L15PFI Overview
You will find FIFO memory chip in the TQFP package.There is a memory of 512kB on the FIFO chip that can be used to store applications and data.Surface Mount is memory IC's recommended mounting method.When the supply voltage is 3.3V , high efficiency is possible.FIFO means contains 128 terminations.In the case of the operation pins, they are 128 pins.For its operation, 40mA is the maximum current required.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.It operates at -40°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.The gadget in FIFOs is self-contained.A OTHER FIFO type memory IC is present in the FIFO memory chip.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3.15V volts.FIFO memory can handle a maximum supply voltage of 3.45V V.It consists of a total of 128 pins.With a frequency of 66.7MHz , it exhibits good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .
72V36110L15PFI Features
512kB memory size
FIFOs category
Frequency at most
72V36110L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V36110L15PFI FIFOs Memory applications.
- Battery Charger
- Switches
- Disk Controllers
- Desktop Computers
- Test site
- Game Controller
- Game Consoles
- Industrial Systems
- Measurement Equipment
- Medical Monitoring Device
