72V36110L15PFI8
| Parameters | |
|---|---|
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Density | 4.5 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
72V36110L15PFI8 Overview
FIFO memory chip is contained in the TQFP package.Surface Mount is recommended as the mounting method.With a supply voltage of 3.3V volts, high efficiency is possible.In FIFO means, there are 128 terminations.In the case of the operation pins, they are 128 pins.Its maximum operating current is 40mA .When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.Keeping the temperature at -40°C degrees Celsius ensures its reliability.The memory logic's maximum operating temperature is 85°C °C, which allows for stable operation.It is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.There is a possibility that FIFO can operate at very low supply voltages, such as 3.15V V.This FIFO memory chip can handle maximum supply voltages of 3.45V volts.Approximately 128 pins are attached to it.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.There is 66.7MHz FIFO memory IC's maximum value for regular operation.
72V36110L15PFI8 Features
FIFOs category
Frequency at most
72V36110L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V36110L15PFI8 FIFOs Memory applications.
- Notebook
- Programmable Logic Controller
- Optical memories
- Thermal Management for DDR3 Memory Modules
- Telecommunication
- Computers
- Switches
- Cardiac Monitoring Device
- Controlled baseline
- IP Radio
