72V36110L6BB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 144 |
| Packaging | Bulk |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Memory Size | 512kB |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Data Bus Width | 36b |
| Organization | 128KX36 |
| Density | 4.5 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height | 1.76mm |
| Length | 13mm |
| Width | 13mm |
| Thickness | 1.76mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V36110L6BB Overview
This package is included in BGA .It's packaged in the shape of a Bulk .The FIFO chips have a memory of 512kB that can be used to store applications and data.Surface Mount is recommended as the mounting method.When the supply voltage is 3.3V , high efficiency is possible.144 terminations are contained in FIFO means.There are 144 pins on the operation pins.In order to operate it, it requires 40mA volts of current.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.The gadget is self-contained and can be found in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Low supply voltages, such as 3.15V V, may be required for operation.The memory logic's maximum supply voltage is 3.45V volts.This FIFO memory IC is equipped with 144 pins in total.A frequency of 166MHz is capable of maintaining good accuracy.During regular operation, the FIFO memory's maximum value is 166MHz .
72V36110L6BB Features
512kB memory size
FIFOs category
Frequency at most
72V36110L6BB Applications
There are a lot of Integrated Device Technology (IDT) 72V36110L6BB FIFOs Memory applications.
- Game Consoles
- Data-acquisition systems
- Down-Hole Energy Drilling
- SPI Bus Flash Memory Device
- Rate buffers
- Medical Monitoring Device
- Event Recorder
- Game Controller
- Consumer Systems
- Network bridges
