72V36110L6BB8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 144 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 128KX36 |
| Density | 4.5 Mb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.97mm |
| Length | 13mm |
| Width | 13mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V36110L6BB8 Overview
You will find FIFO memory chip in the BGA package.The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 3.3V there is the possibility of high efficiency.144 terminations are contained in FIFO means.In the case of the operation pins, they are 144 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 40mA .For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.FIFOs contains this gadget in its entirety.The IC of the part is of the type OTHER FIFO .Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 3.45V volts.A total of 144 pins are present on the FIFO memory IC.It maintains good accuracy at a 166MHz frequency.166MHz is the FIFO memory IC's maximum value for regular operation.
72V36110L6BB8 Features
FIFOs category
Frequency at most
72V36110L6BB8 Applications
There are a lot of Integrated Device Technology (IDT) 72V36110L6BB8 FIFOs Memory applications.
- Battery Charger
- Alarm System
- Communications Systems
- Emulators
- Video
- Network switching/routing
- Extended product life cycle
- SPI Bus Flash Memory Device
- IP Camera Buffer
- Game Controller
